Aftermarket & Haltech ECU tuning
Haltech and other aftermarket ECUs tuned on our in-house Mainline 2WD dyno in Cannonvale. Aftermarket ECU dyno tunes from $1,800 inc GST.
Quick answer
Elite Fleet Auto tunes Haltech and other standalone or plug-in aftermarket ECUs on its in-house Mainline 2WD chassis dyno at 8 Galbraith Park Drive, Cannonvale. An aftermarket ECU dyno tune is from $1,800 inc GST, and a multi-map tune is from $3,200. We are auto electricians as well as mechanics, so wiring can be checked in the same workshop. Call 07 4948 3204.
Aftermarket ECUs
Why an aftermarket ECU needs a proper tune
An aftermarket ECU such as a Haltech takes over the engine management from the factory computer. It gives full control of fuelling, ignition timing, boost and more, which is why it suits engine swaps, older cars being converted to fuel injection, and heavily modified engines. That control only helps once the ECU is calibrated for the engine it is running. A base map from the box or from another car is a starting point, not a finished tune.
On our dyno we run the car under controlled, repeatable load, work through the fuel and ignition tables and check the result before the car goes home.
Standalone or plug-in?
A plug-in ECU is made to connect to a particular vehicle's factory loom. A standalone ECU runs on its own wiring, which is common in swaps and race cars. Either way, the wiring has to be right before the tune means anything: poor earths, noisy sensor signals or a weak power supply show up as misfires and odd readings on the dyno.
Because we do auto electrical work too, we can look at the wiring when we check the car. Talk to us about install work when you book.
One car, more than one map
A multi-map tune puts more than one tune on the one ECU, so you can switch between setups, for example a map for one fuel and another for a different fuel, or a milder street map and a more aggressive one. A multi-map tune is from $3,200 inc GST.
Prices · inc GST
Prices
| Service | Price (inc GST) |
|---|---|
| Aftermarket ECU dyno tune | From $1,800 |
| Multi-map tune | From $3,200 |
| Transmission / TCU tune | From $850, or $500 added to an engine tune |
| Dyno power run | $250 |
| Dyno diagnostic time | $180 |
Final price depends on vehicle and setup; we confirm before we start. 2WD Mainline dyno.
Every dyno price is on the dyno tuning page.
Before you book
- Tell us the ECU (brand and model), engine, injectors, turbo or not, and fuel
- Bring laptop access details or the current tune file if someone else has worked on it
- Fix leaks and warning signs first; book diagnostics if unsure
- Our Mainline dyno is 2WD only: AWD or 4WD-locked vehicles, call first
Engine swaps and major changes may need certification in Queensland. Check TMR's vehicle modifications page.
Frequently asked questions
Do you tune Haltech ECUs?
Yes. We tune Haltech engine management on our in-house Mainline 2WD dyno in Cannonvale.
How much does aftermarket ECU tuning cost?
An aftermarket ECU dyno tune is from $1,800 inc GST; a multi-map tune is from $3,200. Final price depends on vehicle and setup, and we confirm it before we start. Call 07 4948 3204.
Can I bring a car that was base-mapped somewhere else?
Yes. Tell us who set it up and bring any tune file you have. We check the car and wiring first, then tune it on the dyno.
Can you help with the wiring too?
We are auto electricians as well as mechanics, so talk to us about wiring when you book.
What is a multi-map tune?
More than one tune map on the one ECU, so you can switch between setups. It is from $3,200 inc GST.
Book
Book aftermarket and Haltech ECU tuning
Call 07 4948 3204 or send the form below with your make, model, year and rego and what you need. We are at 8 Galbraith Park Drive, Cannonvale QLD 4802, open Mon–Thu 8:00–16:30 and Fri 8:00–14:30.
Book a service or get a quote
Send us a message
Tell us your make, model and rego and what you need. We reply during workshop hours.
Quickest: call 07 4948 3204
Mon–Thu 8:00–16:30 · Fri 8:00–14:30
8 Galbraith Park Drive, Cannonvale QLD 4802